🚧 Austin Fence & Gate Wind Load Certification
Single Family Residential Projects
$500.00$249.00
Out of stock
🚧 Austin Fence & Gate Wind Load Certification
✅ Structural Letter for Residential & Commercial Fencing (City of Austin Approved)
This engineer-stamped wind load letter is designed for fence and gate installations in Austin, Texas, where the local code requires structural verification for fences exceeding 7 feet or for motorized gates with structural supports. It complies with City of Austin Land Development Code and wind design per ASCE 7-16.
🧾 What’s Included:
✔️ PE-Sealed Wind Load Certification Letter (Texas Licensed)
✔️ Design Wind Pressure Calculation (Vult = 140 mph, Exposure C or as per specific site requirements)
✔️ Post Embedment Depth Recommendation (Concrete footings)
✔️ Gate Frame Wind Load & Anchorage Checks (if applicable)
✔️ Site-Specific Assumptions Clearly Stated
✔️ PDF File – Permit-Ready Upload
🚪 Use Cases:
Wood or Vinyl Privacy Fences over 7 ft tall
Metal or Composite Panel Fencing (HOA/Commercial)
Swing or Slide Gates with Post Embedment
Motorized or Automated Gate Installations Subdivision Fencing Projects
📐 Engineering Specs:
Design Wind Speed: 140 mph Vult (City of Austin, ASCE 7-16)
Exposure Category: C (default unless urban obstructions present)
Post Types: Wood, Steel, Aluminum (specify at intake)
Design Standard: ASCE 7-16 (ASD or LRFD method)
Risk Category: II (standard residential or commercial occupancy)
💬 FAQs:
Do I need an engineer letter for my fence in Austin?
Yes — the City of Austin typically requires structural review for fences taller than 7 ft or for structural gates. Many neighborhoods and HOAs also require wind compliance.
What if I don’t know my post spacing yet?
We’ll issue a letter assuming standard spacing (6–8 ft), and adjust if needed once the contractor finalizes layout.
Can I use this for HOA submission too?
Yes — we can provide a simplified PDF summary or letter formatted for HOA board approval if needed.
Is this sealed by a Texas engineer?
Yes — all fence letters are signed and sealed by a licensed Professional Engineer in Texas.
📩 Need Help Before Ordering?
Call us at 813-694-8989 or email info@oasisengineering.com — or use our quick intake form www.oasisengineering.com/contact
© 2025 Oasis Engineering LLC. All rights reserved. Doing business as WindCalculations.com
Austin fence permit, structural letter for fence, wind load letter for gate, Texas PE stamped fence letter, 140 mph wind calc fencing, post embedment calc